ELS Extras Problem

If you need the z3d or any other stuff just ask

Ok, so I made this unmarked Tahoe, but extras 1-4, 10 and 12 refuse to show in game. They preview fine in zmod and OpenIV, but literally don't work at all, and are not recognized by ELS. As you can see in the video, they are treated as regular extras that randomly spawn and not ELS extras. I'm 100% sure it isn't a material hierarchy problem either.

Some screenshots/videos are attached. For the video, I purposely deleted the driver's side headliner bar to see if the bar was blocking the extras, but it wasn't.

Video: https://youtu.be/JD3eB9ZxqLc

This is my ELS extras VCF setup:

<EOVERRIDE>
<Extra01 IsElsControlled="true" AllowEnvLight="true" Color="red" OffsetX="-0.70" OffsetY="-0.20" OffsetZ="0.50" />
<Extra02 IsElsControlled="true" AllowEnvLight="true" Color="red" OffsetX="-0.25" OffsetY="-0.20" OffsetZ="0.50" />
<Extra03 IsElsControlled="true" AllowEnvLight="true" Color="blue" OffsetX="0.25" OffsetY="-0.20" OffsetZ="0.50" />
<Extra04 IsElsControlled="true" AllowEnvLight="true" Color="blue" OffsetX="0.70" OffsetY="-0.20" OffsetZ="0.50" />
<Extra05 IsElsControlled="true" AllowEnvLight="true" Color="red" OffsetX="-0.70" OffsetY="-0.20" OffsetZ="0.50" />
<Extra06 IsElsControlled="true" AllowEnvLight="true" Color="blue" OffsetX="0.70" OffsetY="-0.20" OffsetZ="0.50" />
<Extra07 IsElsControlled="true" AllowEnvLight="true" Color="amber" OffsetX="-0.40" OffsetY="-0.80" OffsetZ="0.40" />
<Extra08 IsElsControlled="true" AllowEnvLight="true" Color="amber" OffsetX="0.00" OffsetY="-0.80" OffsetZ="0.40" />
<Extra09 IsElsControlled="true" AllowEnvLight="true" Color="amber" OffsetX="0.40" OffsetY="-0.80" OffsetZ="0.40" />
<Extra10 IsElsControlled="true" />
<Extra11 IsElsControlled="true" />
<Extra12 IsElsControlled="true" />
</EOVERRIDE>

And here are some images of the vehicle.

Quote from panoszaf

make sure there are no duplicates and extra_ten can only be used as a steady burn extra_12 can only be used as ally lights that you toggle (basically side takedowns)

I attached extras 10 and 12 to 1 and 4 respectively, but I still have the same problem.

I checked, there are no duplicate extras anywhere.

Quote from panoszaf

afaik

What's that?

Quote from panoszaf

check material hierarchy, (spelling (extras must be named extra_1 etc (extra_ten is the exception)), make sure LODs are done right for the extras also in the video what lights are not showing cause the ELS pannel seems to be controlling extras 1-4 if there was no extras with that name they wouldnt flash in the panel

I did all of that stuff, I'm not sure what's wrong. At this point, I'm just going to put a new lightbar on.

Wow it worked ok then I will never use that horrible lightbar again.